LCD Instructions

    DIGITAL WATCHES SETTING SEQUENCE
DIGITAL WATCHES INSTRUCTION
(6 DIGITS ELECTRONIC CHRONO - ALARM WATCH)
CONTROLS OF DIGITAL WATCH :-
Normal Display : Hour, Minute, Second and Day of week.
Push of A - button: Month, Date and Day of week.
Push of B - button: Display shows Alarm Time in Hour and Minute.
Push of C - button: For change of function.
Push of D - button: for E.L. light/Spot light.
ALARM AND CHIME ON/OFF :-
In normal time: Hold B - button and Display shows Alarm Time in Hour and Minute.
  1 x push A - button: Alarm mark will be ON.
  2 x push A - button: Alarm mark will be OFF
  1 x push C - button: Chime Day of Week 7 bars will be ON.
  2 x push C - button: Chime Day of Week 7 bars will be OFF.
  Release B - button and Display Changes to Normal time immediately.
 
CHRONOGRAPH MODE :-
In normal time, push C - button, Chronograph function will be set.
Start/Stop:   Push A - button, It operates in cumulative counting up to 1/100 second.
Lap time:     Change to Lap time from Chronograph time display is performed by Pressing    
                     B - button while Chronograph is Counting. Chronograph keeps counting after change.
                     Push B - button again to return to Chronograph time display.
Reset:         Push A - button to Stop Counting and then push B - button.
ALARM TIME SETTING :-
In normal time, push C - button Twice,
  Monday flag + Hour Digits will flash which will advance through depression of A - button.
  1 x push of B - button: Monday flag + minute digits of the alarm time will flash which is advance as above.
  1 x push of C - button display change to normal time again.
NORMAL TIME SETTING :-
In normal time, push C - button Three times, Tuesday flag + Second digits will flash.
  Push A - button and Second will be reset to zero.
  1 x push of B - button: Minute digits flash and advance by depression of A - button.
  2 x push of B - button: Hour digits flash and advance as above.
  3 x push of B - button: Month digits or Date digits flash. It depends on their position and advance as above.
  4 x push of B - button: Month digits or Date digits flash and advance as above.
  5 x push of B - button: Flag of Weekday flash and advance as above.
    Push of  B - button and second will start for setting again.
    If push of C - button during any changing time. Normal time will be appeared.
12/24 HOURS REVERSAL OPTION :-
There will be an alternative for 12/24 hour option. If A button is continually pressed during Hour setting
The normal 12 hour mode will be converted into 24 hours option and will be returned to 12 hour mode.
If "A" or "P" appears will indicate the time being in 12 hour mode. If "H" appears, it is in 24 hour mode.
ALARM TEST :-
Hold B - button and  A - button Together Alarm will "Beep" and Alarm sounds
 
ALARM SOUND OFF :-
For "Beep, Beep" alarm, push of B - button.
REPLACING THE BATTERY :-
Your watch uses a 1.5-volt button-cell battery. If the watch works improperly or the display dims,
Contact your local store for information about replacing the battery.

To service page  Return to Top